Search Home Explorer

Air supply systems shall provide the air flow required by the design.

Performance/Condition: Glycol levels/percentage shall meet with the requirements of the design.

If a cooling system is provided, it shall be capable of maintaining indoor air temperature at the temperature specified in the design for the geographic location of the building. Not all cooling systems are intended to run all year, so this requirement only applies to the portion of the year that the design indicates is to be provided with cooling.

Piping system shall be installed to prevent damage due to condensation.

Water flow velocity and system balance in domestic water pipes should meet the requirements of the Ontario Building Code and the design.

Plumbing and sprinkler pipes exposed to freezing temperatures should be protected so the fluid inside does not freeze.

Sanitary and storm drainage systems shall drain waste products to a public sewer or private sewer disposal system as per the design.

Faucets or plumbing fixtures shall not leak, drip or run when fully closed or shut off.

Water supply pipes shall be installed to minimize noise caused by water hammer or vibration/pipe movement.

Plumbing fixtures, appliances or trim fittings shall be free of both visual and performance defects.

Electrical receptacles/switches shall be installed so that the cover plate sits generally flush with the adjacent wall surface and square to surrounding finishes.

Electrical panels and circuits must be clearly labeled.