-
FH 10.10: Hinges are Painted
Article type: FreeholdUnless specified in the Agreement of Purchase and Sale or contract, hinges may be painted. Paint shall not interfere with the proper operation of the hinges.
-
FH 10.11: Gaps Exist Between Stair Parts
Article type: FreeholdStair parts (risers, treads, and stringers), where exposed to view in finished areas, shall be fitted to minimize gaps, having aligned surfaces or be filled with a compatible material to achieve the same result. -
FH 10.12: Squeaking Stair Riser or Tread
Article type: FreeholdStair risers and treads shall be free of squeaks caused by loose/inadequately fastened joints. -
FH 10.13: Gaps Exist Between Railing Parts
Article type: FreeholdRailing parts shall be fitted to minimize gaps; structural integrity of the joint shall not be affected by minor gaps. -
FH 10.14: Stair Railings Lack Ridity
Article type: FreeholdStair railings shall be securely constructed in accordance with the Building Code. -
FH 10.15: Joint Quality Of Interior Trim and Moulding Work
Article type: FreeholdJoints in trim, where exposed to view, shall be tightly fitted and have aligned surfaces or be filled with a compatible material to achieve the same result; cracks in excess of 1.5 mm are not acceptable. -
FH 10.16: Nailheads And Fasteners are Not Properly Set or Filled
Article type: FreeholdNailheads and fasteners shall not protrude above the surface. Where nailheads and fasteners have been set below the surface they shall be filled with compatible filler unless designed otherwise. Filler may be noticeable under normal lighting conditions. -
FH 10.17: Interior Trim Is Split
Article type: FreeholdTrim shall not have visible splits. -
FH 10.18: Hammer Marks Visible On Trim
Article type: FreeholdInterior finished trim shall be free from visible hammer marks at the time of the PDI. -
FH 10.19: Resin Bleeding Through Painted Finish
Article type: FreeholdResin shall not bleed through painted finish on trim.
-
FH 10.2: Bi-fold And Sliding Doors Come Off Tracks
Article type: FreeholdBi-fold and sliding doors shall operate freely and remain on their tracks during normal operation.
-
FH 10.20: Wall Area Around Cold Room Door is Unfinished
Article type: FreeholdWhere the cold room is located in an unfinished basement, wall finish around the door is not required.
-
FH 10.21: Interior Door Edge Is not Painted
Article type: FreeholdWhere an interior door is intended to be painted and the door edges are visible, they shall also be painted. -
FH 10.22: Stairs, Treads and/or Landing are Out of Level
Article type: FreeholdStairs shall be installed in accordance with the Building Code. -
FH 10.23: Unfilled Gaps Between Baseboards and Wall
Article type: FreeholdUnfilled gaps between baseboards and walls, where exposed to view, shall be tightly fitted. Unfilled gaps in excess of 2 mm are not acceptable.
Need assistance from Tarion?
If you have questions about your home or the warranty, please Contact Us