Where the cold room is located in an unfinished basement, wall finish around the door is not required.

One-Year - Work and Materials. Two-Year - Ontario Building Code Health & Safety Violations. · Damage resulting from alterations, deletions or additions made by the homeowner is excluded from the statutory warranty.

Where the wall finish is not installed, no action is required.

The door frame must be secured to operate properly and be installed to meet the Building Code requirements for insulation, air and vapour barriers and weatherstripping.

Bi-fold and sliding doors shall operate freely and remain on their tracks during normal operation.

One-Year - Work and Materials. · Damage resulting from normal wear and tear or improper maintenance is excluded from the statutory warranty.

Doors not meeting the acceptable performance shall be repaired.

Confirm proper operation of the doors during the PDI. Defects discovered after the PDI will be covered under the warranty if they result from the Builder’s work. However, bi-fold and sliding doors may require adjustment from time to time to maintain alignment and hardware may need to be cleaned and lubricated as part of normal home maintenance. See Also: 3.19 SLIDING DOOR SCREEN WILL NOT STAY ON TRACK OR SLIDING DOOR DOES NOT ROLL SMOOTHLY

Resin shall not bleed through painted finish on trim.

One-Year - Work and Materials

Painted finishes not meeting the acceptable condition shall be repaired.

The extent of resin bleeding, while a natural characteristic of wood, can be controlled.