- Condition
- FH 1.19: Radon Exceeds Acceptable Levels
- Article Type
- Freehold
- Article Number
- 1.19
- Warranty Year(s)
- One Year
- Performance
- Radon levels in a home shall not exceed 200 Becquerels per cubic metre (Bq/m3).
- Warranty
- One-Year – Workmanship & Materials Two-Year – Ontario Building Code Health and Safety Violations Seven-Year – Major Structural Defect • A complete list of “CONDITIONS NOT COVERED UNDER WARRANTY” is on p.15 of the Guidelines.
- Action
- Where long-term test results indicate that radon levels in a home exceed 200 Becquerels per cubic metre (Bq/m3) and are the result of a Building Code violation or a defect in work or materials supplied by the builder, repairs shall be made.
- Condition
- FH 8.2: Exterior Air Infiltration Through Windows and Doors
- Article Type
- Freehold
- Article Number
- 8.2
- Warranty Year(s)
- One Year
- Performance
Windows and doors shall meet the rating for weather tightness required by the Building Code.
- Warranty
One-Year - Work and Materials
- Action
Ensure the window or door has been tested to meet the required weather tightness rating. Adjust weather stripping and/or hardware to reduce air leakage by ensuring positive contact along the weather seal.
- Condition
- FH 8.5: Condensation And/Or Frost On Windows
- Article Type
- Freehold
- Article Number
- 8.5
- Performance
- Condensation may occur on interior window surfaces and is not covered under warranty.
- Warranty
- None.
- Action
- None
- Condition
- FH 8.6: Condensation on Interior Ductwork And Air Handling Equipment
- Article Type
- Freehold
- Article Number
- 8.6
- Performance
Condensation may occur on indoor ductwork and air handling equipment.
- Warranty
None. · Damage caused by dampness or condensation due to failure by the homeowner to maintain adequate ventilation is excluded from the statutory warranty.
- Action
None
- Condition
- FH 8.7: Insufficient Insulation
- Article Type
- Freehold
- Article Number
- 8.7
- Warranty Year(s)
- One Year
- Performance
Performance/Condition: Insulation shall be installed in accordance with the Building Code.
- Warranty
One-Year - Work and Materials. Two-Year - Ontario Building Code Health & Safety Violations
- Action
Insulation levels not meeting the acceptable condition shall be repaired.
- Condition
- FH 8.8: Heating, ventilating or air conditioning (HVAC) systems not installed properly
- Article Type
- Freehold
- Article Number
- 8.8
- Warranty Year(s)
- One Year
- Performance
- HVAC appliances shall be installed to meet the manufacturer’s specifications and the Building Code. Ductwork and piping shall be joined and supported to maintain joint integrity.
- Warranty
- One-Year - Work and Materials.Two-Year - Ontario Building Code Health & Safety Violations.Two-Year - Heating Delivery and Distribution SystemsDamage resulting from alterations, deletions or additions by the homeowner, or improper maintenance, is excluded from the statutory warranty.
- Action
- Where builder-supplied and installed appliances, ductwork and piping do not meet the acceptable performance, repairs shall be made.
- Condition
- FH 8.9: Inadequate Heating
- Article Type
- Freehold
- Article Number
- 8.9
- Warranty Year(s)
- One Year
- Performance
Heating systems shall be capable of maintaining an indoor air temperature of: a) 22°C in living spaces and unfinished basements b) 15°C in crawl spaces; at the design temperature for the geographical location.
- Warranty
One-Year - Work and Materials. Two-Year - Delivery and Distribution Systems. · Damage resulting from alterations, deletions or additions made by the homeowner and from improper maintenance is excluded from the statutory warranty.
- Action
Where the heating system is not capable of maintaining the prescribed temperature, repairs shall be made.
- Condition
- FH 8.10: Inadequate Cooling
- Article Type
- Freehold
- Article Number
- 8.10
- Warranty Year(s)
- One Year
- Performance
Cooling systems shall be capable of maintaining an indoor air temperature of 24°C at the design temperature for the geographical location.
- Warranty
One-Year - Work and Materials. Two-Year - Delivery and Distribution Systems Defects in materials, design and work supplied by the homeowner, and damage resulting from improper maintenance, or from alterations, deletions or additions made by the homeowner are excluded from the statutory warranty.
- Action
Where builder-supplied and installed appliances, ductwork and piping do not meet the acceptable performance, repairs shall be made.
- Condition
- FH 8.11: Noisy Ductwork
- Article Type
- Freehold
- Article Number
- 8.11
- Performance
Ductwork may make noise as it expands and contracts during heating and cooling cycles.
- Warranty
None
- Action
None
- Condition
- FH 8.14: Ductwork Comes Apart
- Article Type
- Freehold
- Article Number
- 8.14
- Warranty Year(s)
- Two Year
- Performance
- Ductwork shall be joined and supported to prevent separation or detachment and maintain joint integrity.
- Warranty
- Two-Year - Delivery and Distribution Systems. · Damage resulting from improper maintenance, or from additions, deletions or alterations made by the homeowner is excluded from the statutory warranty.
- Action
- Ductwork not meeting the acceptable condition shall be repaired.
- Condition
- FH 8.15: Condensate Line is Blocked
- Article Type
- Freehold
- Article Number
- 8.15
- Warranty Year(s)
- One Year
- Performance
- Condensate lines from furnaces, air conditioning condenser coils and heat recovery ventilators shall be free from blockage.
- Warranty
- One-Year - Work and Materials. · Damage resulting from normal wear and tear or improper maintenance is excluded from the statutory warranty.
- Action
- Condensate lines not meeting the acceptable condition shall be repaired.
- Condition
- FH 8.16: Air Conditioning Coolant Line Leaks
- Article Type
- Freehold
- Article Number
- 8.16
- Warranty Year(s)
- One Year
- Performance
- Air conditioning systems supplied and installed by the builder shall not leak.
- Warranty
- One-Year - Work and Materials. · Damage resulting from improper maintenance, or from additions, deletions or alterations made by the homeowner is excluded from the statutory warranty.
- Action
- Air conditioning systems not meeting the acceptable condition shall be repaired.
`
This condition may occur in the summer when air conditioning equipment is operating or in winter when ducts are chilled by incoming outdoor air. For example, condensation may occur on range hood exhaust ducts during cold outdoor temperatures.
Several factors affect living space temperatures: a) Proper installation of insulation shall include correct placement behind electrical boxes, backing studs, corner framing and wiring, and around window and door openings. b) Directional orientation - north-facing rooms are generally cooler than south-facing rooms. c) Windows - glass has little insulating value and allows more heat to escape from the room. d) Rooms over garages - have insulated floors that lose heat to the unheated garage below. e) Airflow - free airflow from the supply outlet in a room to a return inlet or undercut door is essential. Generally, a minimum 25 mm space under interior doors above the finished floor covering should be provided.
Several factors affect living space temperatures: a) Directional orientation - north-facing rooms are generally cooler than south-facing rooms. b) Windows - glass has little insulating value and allows more heat to escape from the room. c) Rooms over garages - have insulated floors that lose heat to the unheated garage below. d) Airflow - free airflow from the supply outlet in a room to a return inlet or undercut door is essential. Generally, a minimum 25 mm space under interior doors above the finished floor covering should be provided. e) Personal preference - personal comfort differs between individuals. f) Use of programmable thermostats. Balancing the air delivery system may not completely compensate for the effects of these factors. In determining the temperature of a room, measurements shall be taken in the center of the room at 1,500 mm above the floor. Heat loss calculations and duct designs assist in determining the furnace size and adequacy of the heating system. See Also: 8.8 HEATING, VENTILATING OR AIR CONDITIONING (HVAC) SYSTEMS NOT INSTALLED PROPERLY
Sustained high outdoor temperatures exert large loads on cooling equipment; indoor temperatures will rise until outdoor temperatures return to design levels. Skylights and large window areas can allow sunlight and heat to transfer easily into the home. Temperatures tend to vary in a multi-storey home due to normal air movement patterns. Heat gain calculations and duct designs assist in determining the equipment size and adequacy of the cooling system. Cooling is not a requirement of the Building Code. See Also: 8.8 HEATING, VENTILATING OR AIR CONDITIONING (HVAC) SYSTEMS NOT INSTALLED PROPERLY 8.16 AIR CONDITIONING COOLANT LINE LEAKS
None